IVOLT PRO EXTERNAL BATTERY BAB-95Increase the duration of the Parking Surveillance mode of your Thinkware Dash Cam with the iVolt PRO External Battery.
The Benefits of using a Dash Cam Battery PackWith its 8.5 A high-speed charging, the external battery is capable of operating a dash cam for up to 27 hours on approximately 50-minute charge. Max recording time will vary by the Thinkware Dash Cam in use.
Supports parallel installation of two external batteries to expand battery capacity.
Compatible with all Thinkware Dash Cam models.
Do I need to use a Dash Cam Battery Pack?Thinkware Dash Cams offer a few different methods in which the device is powered.
All Thinkware Dash Cams come standard with a built-in voltmeter and battery protection settings to ensure you will not return to your vehicle with a dead battery. These Voltage Settings can be utilized with the Hardwiring Kit or OBD-II Harness to protect your battery when using Parking Mode.
However, If you wish to record an extended amount of Parking Footage, or if you have a Luxury Vehicle/Small Vehicle Battery the Thinkware iVolt Mini Battery Pack may be the right choice for you.
Extended Parking ModeWhen Hardwired the Dash Cam will record in Parking Mode for approximately 8 hours (depending on vehicle’s battery and the voltage cut-off setting) before powering down to save power. With the iVolt Mini, your 1 Channel Dash Cam can run for 27 hours, or if you have a 2 Channel Dash Cam, 16 hours in Parking Mode before needing to recharge the battery pack.
Safe for Luxury VehiclesIf you own a Luxury Vehicle such as a BMW, battery drainage not only means replacing the vehicle’s battery but it can also require the dealership to reset the vehicle’s electronics, which can turn into an extremely expensive fix.
By using a Dash Cam Battery Pack, you will still be able to use our Advanced Parking Mode risk-free.
Avoid Wear and TearWith a Hardwired Dash Cam, the constant discharge on the battery over a long period of time can cause wear and tear. The iVolt Mini Battery Pack only draws power to charge when you are driving the vehicle, which prevents damage to the vehicle’s battery over time. With the ignition off, the Dash Cam relies solely on the Battery Pack for power, eliminating the need to draw power from the vehicle’s battery completely.
Part Number: BAB-95
Specification
- Output voltage/current: 11.0 V – 14.2 V/2 A MAX
- Charging voltage/current: LOW (normal-speed charge mode): 14.2 V/4.5 A Max HIGH (high-speed charge mode): 14.2 V/8.5 A Max
- Charging time: LOW (normal-speed charge mode): Approximately 90 minutes HIGH (high-speed charge mode): Approximately 50 minutes
- Use time: Approximately 27 hours (based on a dash cam’s 3.5 Wh power consumption rate)
- Cells: Lithium iron phosphate (LiFePo4)
- Product capacity: 12.8 V/7,500 mAh/96 Wh
- Dimensions/weight: 155 (W) X 216 (L) X 34 (T) mm/Approximately 1.5kg
- Operating temperature: Charging: 0 – 45 °C Discharging: -10 – 60 °C
- All Thinkware Dash Cam models.
2 Year Warranty
What's Included
- iVolt ProBattery BAB-95
- Input Cable
- Output Cable
- Instruction Manual
Dash Cam Hardwire Cable Sold Separately
