Mosconi Pico 8 | 12 DSP Amp 8 Channel Amplifier with 12 Channel DSP Up to 480w-0
Mosconi Pico 8 | 12 DSP Amp 8 Channel Amplifier with 12 Channel DSP Up to 480w-1
Mosconi Pico 8 | 12 DSP Amp 8 Channel Amplifier with 12 Channel DSP Up to 480w-0
Mosconi Pico 8 | 12 DSP Amp 8 Channel Amplifier with 12 Channel DSP Up to 480w-1
Need help? Send us an email with your enquire.

Mosconi Pico 8 | 12 DSP Amp 8 Channel Amplifier with 12 Channel DSP Up to 480w

£969.00 Sold out

MOSCONI PICO 8 | 12 DSP

8 Channel Amplifier Class D Technology Up to 480 Watts @ 2 Ohm

MOSCONI PICO 8|12 DSPPERFECT OEM INTEGRATION

Powerful DSP amplifier optimized for factory radio use. Four analog inputs, flexible routing, 3 x input EQ and delay. With 8 x 50 Watts ideal for active multi-way systems and extensive installations. Ready for the future with two digital inputs (SP-Dif and BT+) and two processed line outs.

SIGNAL CONTROLLED POWER SUPPLY

In contrast to Class G/H, the power supply is only switched on when required (high levels) and regulated depending on the power demand. Benefit: The quiescent current is between 250 mA and 450 mA (depending on the speaker circuitry) -> Especially interesting for electromobility and motorhomes

TRANSDUCERLESS HIGH-SPEED PWM POWER AMPLIFIERS

High-efficiency PWM amplifiers with the fastest carrier frequency in the world today (> 2 MHz), enables HiRes audio transmission and the extremely small size. The modulation is done without DAC directly from the 96 kHz TDM signal of the DSP, thus the noise floor is close to zero and THD+N ~ 0.02 % / 1 W.

Part Number: MOSCONI PICO 8|12 DSP

Specification

  • 4 x analog inputs balanced (high-level) up to 30 V
  • 2 x analog inputs switchable (high level / low level)
  • 1x digital input SP-Dif optical (8 kHz - 96 kHz sampling rate)
  • 1 x bluetooth port with SP-Dif - TTL (8 kHz - 96 kHz, e.g. for Mos AMAS bluetooth streaming module)
  • Bluetooth extended digital audio port (BT+)
  • (flexible 8 kHz - 384 kHz synchronous digital input for audio sources with 2 - 16 channels, direct DSP access without jitter, e.g. for MOS BTS-LD4C BT streaming module or extended analog inputs)
  • 294.912 MHz, 32-bit audio port, 64-bit core
  • Double precision 56 bit filter calculation
  • 3072 SIMD instructions per sample at 96 kHzASRCs from 1:8 up to 7.75:1 ratio and 139 dB DNR
  • 1 x USB serial data (connection PC / GUI)
  • 1 x remote connector (connection for RCD, RC-Mini, RTC-Hub)
  • 2 x bluetooth control port (connection MOS-BT3.0 (app control), RC-Can (CAN bus control)
  • 1 x remote out, 1 x remote In, auto-remote with highlevel connection
  • Connections with MOLEX® plug contacts
  • Very small size with low heat generation, best suited for installation behind cladding
  • 3 x 9 band parametric input EQ (de-equalizing)
  • 6 x input delay 0 - 3ms / 0.01ms (de-delay)
  • 10 x input level control digital (signal conditioning)
  • Flexible mixer for signal routing
  • (side separated, can sum and subtract, 10 inputs to 4 x 2 output groups)
  • 6 x 30 band or 4 x 30 band + 2 x 15 band group EQ
  • (parametric, relative phase remains stable)
  • 12 x 10 band output filters
  • Highpass / lowpass / highshelf / lowshelf / notch / allpass 1st + 2nd order / speaker-EQ)
  • 12 x speaker delay 0 - 12 ms, 0.01 ms
  • 12 x speaker phase switch
  • 8 x 60 W speaker output 3-Ohm stable (not bridgeable!)
  • 4 x 2 Vrms line outputs SN/R 112 dB
  • 1 x digital output optical (96 kHz / 24 Bit, fully masterable)

2 Year Warranty

What's Included

  • MOSCONI PICO 8|12 DSP

Looking for Installation?

Contact Us

Extensive Speaker Range

View Products